<div dir="ltr">Hi,<div><br></div><div>I have the following setup :- </div><div><br></div><div>4* node in distributed replicated </div><div>replica =2</div><div>24*brick in each node....</div><div>i am using each brick as 256GB SSD...</div><div>I have 2*10Gb lan with bonding for storage purpose</div><div><br></div><div>As i am using SSD but still i am getting the very slow I/O  In my guest VM.....</div><div><br></div><div><div>[root@centos7-2 ~]# dd if=/dev/zero of=/tmp/output bs=1M count=1k;rm -rf /tmp/output</div><div>1024+0 records in</div><div>1024+0 records out</div><div>1073741824 bytes (1.1 GB) copied, 12.9764 s, 82.7 MB/s</div><div>[root@centos7-2 ~]#</div></div><div><br></div><div>If i run the same command on the host it&#39;s around 561MB/s...</div><div><br></div><div><div>[root@cpu04 10.10.0.6:_vol1]# dd if=/dev/zero of=/rhev/data-center/mnt/glusterSD/10.10.0.6:_vol1/output bs=1M count=1k;rm -rf /rhev/data-center/mnt/glusterSD/10.10.0.6:_vol1/output</div><div>1024+0 records in</div><div>1024+0 records out</div><div>1073741824 bytes (1.1 GB) copied, 1.91395 s, 561 MB/s</div><div>[root@cpu04 10.10.0.6:_vol1]#</div></div><div><br></div><div>Is there any way to optimize it for KVM virtulization....so i will get the best use of the SSD...</div><div><br></div><div>Thanks,</div><div>Punit</div></div>