  Booting 'Red Hat Enterprise Linux Server (2.6.18-92.1.10.el5PAE)'

root (hd0,0)
 Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.18-92.1.10.el5PAE ro root=/dev/VolGroup00/LogVol00 console=
ttyS1,57600
   [Linux-bzImage, setup=0x1e00, size=0x1b61d4]
initrd /initrd-2.6.18-92.1.10.el5PAE.img
   [Linux-initrd @ 0x37cf5000, 0x2fa80e bytes]

Linux version 2.6.18-92.1.10.el5PAE (brewbuilder@hs20-bc1-7.build.redhat.com) (8
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 0000000000100000 - 00000000cfb50000 (usable)
 BIOS-e820: 00000000cfb50000 - 00000000cfb66000 (reserved)
 BIOS-e820: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
 BIOS-e820: 00000000cfb85c00 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
8064MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
NX (Execute Disable) protection: active
DMI 2.5 present.
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Processor #6 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
Processor #5 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
Processor #3 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Detected 2327.722 MHz processor.
Built 1 zonelists.  Total pages: 2293760
Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS1,57600
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c074a000 soft=c072a000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 8302784k/9175040k available (2093k kernel code, 79848k reserved, 872k d)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay using timer specific routine.. 4657.57 BogoMIPS (lpj=2328786)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c074b000 soft=c072b000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4654.98 BogoMIPS (lpj=2327494)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c074c000 soft=c072c000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4655.01 BogoMIPS (lpj=2327506)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c074d000 soft=c072d000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4654.99 BogoMIPS (lpj=2327499)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 4/4 eip 3000
CPU 4 irqstacks, hard=c074e000 soft=c072e000
Initializing CPU#4
Calibrating delay using timer specific routine.. 4655.05 BogoMIPS (lpj=2327525)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 5/5 eip 3000
CPU 5 irqstacks, hard=c074f000 soft=c072f000
Initializing CPU#5
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327516)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 6/6 eip 3000
CPU 6 irqstacks, hard=c0750000 soft=c0730000
Initializing CPU#6
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327515)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 7/7 eip 3000
CPU 7 irqstacks, hard=c0751000 soft=c0731000
Initializing CPU#7
Calibrating delay using timer specific routine.. 4655.03 BogoMIPS (lpj=2327518)
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel(R) Xeon(R) CPU           E5410  @ 2.33GHz stepping 06
Total of 8 processors activated (37242.71 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
migration_cost=86,13208
checking if image is initramfs... it is
Freeing initrd memory: 3050k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Dell PowerEdge 1950 detected, enabling pci=bfsort.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 *6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:08: ioport range 0x800-0x87f could not be reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0x900-0x900 has been reserved
pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca9-0xcab has been reserved
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
PCI: Bridge: 0000:06:00.0
  IO window: disabled.
  MEM window: f4000000-f7ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
  IO window: disabled.
  MEM window: f4000000-f7ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:05:01.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.0
  IO window: disabled.
  MEM window: f4000000-f7ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:04:00.3
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
  IO window: disabled.
  MEM window: f2000000-f7ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
  IO window: e000-efff
  MEM window: fc500000-fc6fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
  IO window: d000-dfff
  MEM window: fc300000-fc4fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
  IO window: disabled.
  MEM window: f8000000-fbffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: f8000000-fbffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: fc100000-fc2fffff
  PREFETCH window: d8000000-dfffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1225886553.089:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 32B45DA68B873F01
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
assign_interrupt_mode Found MSI capability
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: CPU0 (power states: C1[C1] C3[C3])
ACPI: CPU4 (power states: C1[C1] C3[C3])
ACPI: CPU2 (power states: C1[C1] C3[C3])
ACPI: CPU6 (power states: C1[C1] C3[C3])
ACPI: CPU1 (power states: C1[C1] C3[C3])
ACPI: CPU5 (power states: C1[C1] C3[C3])
ACPI: CPU3 (power states: C1[C1] C3[C3])
ACPI: CPU7 (power states: C1[C1] C3[C3])
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
?serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
hda: TEAC DVD-ROM DV28EV, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports<6>Time: tsc clocksource has been installed.
 S0 S4 S5)
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 392k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
LoACPI: PCI Interrupt 0000:00:1d.7[A] -> ading ehci-hcd.kGSI 21 (level, low) ->6
o module
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 66, io mem 0xfc700000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Loading ohci-hcd.ko module
Loading uhci-hcdUSB Universal Host Controller Interface driver v3.0
.ko module
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 66
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 66, io base 0x0000bce0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 74
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
usb 1-1: new high speed USB device using ehci_hcd and address 2
uhci_hcd 0000:00:1d.1: irq 74, io base 0x0000bcc0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 66
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 66, io base 0x0000bca0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 74
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 74, io base 0x0000bc80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading megaraidmegasas: 00.00.03.15-RH1 Wed Nov. 21 10:29:45 PST 2007
_sas.ko module
megasas: 0x1000:0x0060:0x1028:0x1f0c: bus 1:slot 0:func 0
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
megasas: FW now in Ready state
usb 1-5: configuration #1 chosen from 1 choice
scsi0 : LSI SAS based MegaRAID driver
  Vendor: SEAGATE   Model: ST3300655SS       Rev: S528
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: SEAGATE   Model: ST3300655SS       Rev: S528
  Type:   Direct-Access                      ANSI SCSI revision: 05
hub 1-5:1.0: USB hub found
hub 1-5:1.0: 4 ports detected
  Vendor: DP        Model: BACKPLANE         Rev: 1.05
  Type:   Enclosure                          ANSI SCSI revision: 05
  Vendor: DELL      Model: PERC 6/i          Rev: 1.11
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 584843264 512-byte hdwr sectors (299440 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
SCSI device sda: 584843264 512-byte hdwr sectors (299440 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:2:0:0: Attached scsi disk sda
Loading libata.ko module
Loading ata_piix.ko module
Loading dm-mod.ko module
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Waiting for driver initialization.
usb 1-1.1: new full speed USB device using ehci_hcd and address 4
usb 1-1.1: configuration #1 chosen from 1 choice
input: Dell DRAC5 as /class/input/input0
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: Dell DRAC5 as /class/input/input1
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
Scanning and configuring dmraid supported devices
Scanning logical volumes
  Reading all physical volumes.  This may take a while...
  Found volume group "VolGroup00" using metadata type lvm2
Activating logical volumes
  2 logical volume(s) in volume group "VolGroup00" now active
Creating root device.
Mounting root filesystem.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
audit(1225886560.249:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294965
audit(1225886560.378:3): policy loaded auid=4294967295 ses=4294967295
INIT: version 2.86 booting
        Welcome to Red Hat Enterprise Linux Server
        Press 'I' to enter interactive startup.
Setting clock  (utc): Wed Nov  5 13:02:41 CET 2008 [  OK  ]
Starting udev: [  OK  ]
Loading default keymap (es): [  OK  ]
Setting hostname streamer010.p4.bt.bcn.flumotion.net:  [  OK  ]
Setting up Logical Volume Management:   2 logical volume(s) in volume group "Voe
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 
/dev/VolGroup00/LogVol00: clean, 50329/72581120 files, 11416204/72564736 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
/boot: clean, 38/26104 files, 20956/104388 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Applying Intel CPU microcode update: [  OK  ]
Updating issue, issue.net and motd files:  [  OK  ]
Starting monitoring for VG VolGroup00:   2 logical volume(s) in volume group "Vd
[  OK  ]
Starting sysstat:  Calling the system activity data collector (sadc): 
[  OK  ]
Applying iptables firewall rules: [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Bringing up interface eth3:  [  OK  ]
Starting restorecond: [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Starting ipmi drivers:  IPMI kcs interface initialized
[  OK  ]
Starting irqbalance: [  OK  ]
Starting mcstransd: [  OK  ]
Setting up Logical Volume Management:   2 logical volume(s) in volume group "Voe
[  OK  ]
Checking network-attached filesystems
[  OK  ]
Mounting other filesystems:  [  OK  ]
Starting squale: fuse init (API version 7.8)
fuse distribution version: 2.7.3-glfs10
[  OK  ]
Starting snmpd: [  OK  ]
Starting sshd: [  OK  ]
Starting ntpd: [  OK  ]
Starting flumotion-cluster-client: DEBUG [ 3054]                               )
DEBUG [ 3054]                                  common            Nov 05 13:03:0)
DEBUG [ 3054]                                  cluster-client    Nov 05 13:03:0)
DEBUG [ 3054]                                  cluster-client    Nov 05 13:03:0)
[  OK  ]
Starting manager default: [  OK  ]
Starting worker default: [  OK  ]
Starting Nagios NRPE daemon (nrpe): [  OK  ]
Starting postfix: [  OK  ]
Starting crond: [  OK  ]
Starting Avahi daemon... [FAILED]



